PXII/PXIII Ranger 3.2L 3" DPF Back Exhaust
Ranger 3.2L TDCI (DPF Model) PXII/PXIII 08/2016 on
or 4 payments of $312.75 with Info
3″ DPF BACK EXHAUST FOR PXIII 3.2L FORD RANGER: 08/2016…
PERFORMANCE GAIN: 4KW / 10NM
The Ford PXIII Ranger has a reputation for being a tough and practical Ute, and Torqit’s 3″ DPF Back Performance Exhaust has the strength and quality to back it up. Expertly designed for maximum power and torque, the Ford PXIII Ranger Exhaust is one of the thickest and most durable mandrel bent systems of it’s kind in Australia.
The tough 304 grade stainless steel grantees extreme strength across all terrains, and is ideal for towing, touring and off-roading. The brushed stainless steel not only looks great, it adds depth to the note which is a large improvement on the factory exhaust. As a three-piece bolt together system, the exhaust starts from the back of the DPF and connects with 10mm thick two-bolt flanges, which are also made from 304 grade stainless steel.
As this PXIII Ranger Exhaust bolts onto the back of the DPF, it complies with all regulations and insurance requirements, and your vehicle warranty remains intact. The DPF Back Ford Ranger system is designed to improve the flow of gases, which in turn lowers the exhaust gas temperatures (EGT’s). Lowering the EGT’s is crucial when adding an exhaust to a vehicle fitted with a DPF- as you are probably aware there are few things which will damage a diesel engine faster than excessive EGT’s. Additionally, fitting Torqit’s Ford Ranger DPF Back Exhaust will also increase engine efficiency and fuel economy- it is the ideal alternative to deleting your DPF without the legal ramifications.
PERFORMANCE EXHAUST FEATURES
Thick Stainless Steel
An exhaust system is exposed to many varied elements, including extreme heat and rough terrain. To handle these harsh conditions, we use stainless steel that is up to 2mm thick to maintain structural strength even after bending. Being extremely durable and difficult to crack, you can go off-road with peace of mind that your Torqit Performance Exhaust system will stay intact. Steel thickness not only affects the strength of an exhaust system, but also the sound it will produce- the thinner the steel, the tinnier the note. As among the thickest mandrel bent systems available in Australia, Torqit Performance Exhausts produce a deep note without cabin drone. Click here to listen to the sound of cheap vs quality stainless steel.
304 Grade Stainless Steel
The highest quality steel used in exhaust systems is 304 grade stainless, which is renowned for its high strength, corrosion resistance, and easy maintenance. It is known as an austenitic stainless steel, meaning due to a high percentage of chromium and nickel it is extremely resistant to rust, stress, and harsh conditions such as high temperatures. The excellent properties of Torqit’s 304 grade stainless demonstrate its strength in comparison to the 409 grade stainless commonly used in the automotive industry. For heavy duty strength and resistance to corrosion, 304 grade stainless steel is the superior choice. A 4WD owner who undertakes water crossings, backs their vehicle into the water to unload a boat, or lives by the coast will especially benefit from our stainless steel systems.
Internal & External Welds
High quality welds are essential to avoiding structural fatigue on joints, stopping cracks from forming, and preventing exhaust gas leaks. All Torqit Performance Exhausts are TIG welded internally and externally, to reinforce the system for maximum strength. TIG welding is complex and more time consuming than the usual MIG welding technique used on exhausts; however it is a key part of creating a premium system. Torqit’s welds are extremely precise, higher quality, and create a beautiful clean finish with no welding spatter.
Mandrel Bent System
Torqit’s Mandrel Bender uses a flexible mandrel rod to support the pipe internally and prevent crinkling as it is bent. This maintains a smooth and constant diameter, improving the efficiency of your engine. With Torqit’s in house mandrel bender, we can maintain the structural integrity and thickness of our systems, prevent restricted exhaust flow, and reduce back pressure. State of the art programming means each exhaust is precisely replicated to follow the correct path, and guarantees accurate fitment. Check out the Torqit Mandrel Bender in action.
FORD RANGER 3” EXHAUST INSTALLATION
The Torqit PXIII 3″ DPF Back Ranger Exhaust is a full bolt together system, which can be installed in under an hour on your driveway. It comes with a full fitment kit and requires only a basic socket set and spanners for install.
- Brushed stainless steel tube up to 2mm thick
- Premium 304 grade stainless steel
- Fully mandrel bent system
- Internal and external welds
- Two-bolt laser cut flanges
- Heavy-duty wrap around brackets
- Stainless steel resonator/muffler
- Deep note without cabin drone
- DIY bolt together install
- Ten year product warranty
* Please note that any aftermarket accessories, including long-range fuel tanks and suspension upgrades, must be considered before ordering a Torqit exhaust. Please contact our head office to arrange a solution for your vehicle.
Be The First To Review This Product!
Help other Locked 4x4 Australia users shop smarter by writing reviews for products you have purchased.